Admin Manual
MWP1100A
42
♦ RTP/RTCP : RTP (Real-time Transport Protocol) is an Internet protocol used to send realtime data such as
video and audio. RTP in itself doen’t guarantee realtime transmission of data, but it provides an environment
to application programs support streaming (Streaming: a technology to process received and transmitted
data seamlessly like flowing water) and it is usually run on the UDP protocol.
The port number is incremented from the configured first port number one by one as the session (call
connection) is used and if the configured last number is reached, it returns to the first number.
Ex) If 3000 ~ 3006 is set, the port number is incremented one by one from port 3000 to port 3006,
and then returns to port 3000.
To Next Page
Loading...