MX123 Connection System User Manual - AS-34566-001 68
Section 10 (Appendix A): Document Change
History
• Rev 1: Initial Release
• Rev 1 to Rev 2:
– Modified the Connector Mating and Unmating Procedure
– Updated and Released Only Sections 4 and 5
• Rev 2 to Rev 3:
– Updated the Connector Mating and Unmating Procedure Based on Customer Input
– Updated and Released Only Sections 4 and 5
• Rev 3 to Rev 4:
– Incorporated the Connector Modified Mating Procedure into the Full Reference Manual
• Rev 4 to Rev 5:
– Revised Section 4 – Connector Mating Instructions
– Revised Section 5 – Service Instructions
– Added Appendix A – Document Change History
– Added Appendix B – Connector Mating Instructions – Modified Mating Procedure
– Added Appendix C – Service Instructions – Modified Unmating Procedure
• Rev 5 to Rev 6: Production Copy
– Revised All Sections for Production Release
• Rev 6 to Rev 7:
– Revised Multiple Sections with Formatting Updates .
– Revised Section 5: Terminal Crimping.
– Revised Section 5: Harness Connector Removal from Module.
– Revised Section 6. Added Pogo Pin and Probing Recommendations.
– Added Section 7: Tool Ordering Information.
• Rev 7 to Rev 8:
– Revised Section 2: Product Summary
– Revised Section 5: Servicing Instructions
– Added Appendix B: Cleaning Instructions
• UG Models Available Through GM IMAN
• Molex Drawings Available Through Molex Sales
Section 9: Files
To Next Page
