molex MX150 - User Manual

APPLICATION SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No:
ABC2001-9999
1
DATE:
2008/16/03
TITLE:
MX150 Application Guide
1 of 62
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
AS
-
33472
-
100
Brian Zelinski Steve Verzyl Scott Marceau
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
MX150 System
Sealed Product Line

Summary

Connector Assembly

B. TPA in Pre-lock and Lock

C. Terminal Installation

Provides instructions on how to correctly install terminals into the connector.

D. Seal Plug Installation

Details the procedure for installing seal plugs into connector cavities.

E. Seating the TPA Receptacle side

Describes how to seat the TPA on the receptacle side to its final lock.

F. Seating the TPA Blade side

Explains the procedure for seating the TPA on the blade side.

Connector Mating

B. Connector mating (continued)

Continues the process of connector mating, focusing on CPA locking.

A. Connector mating

Guides on how to align and connect the mating connectors properly.

Service Instructions

A. Un-mate procedure

Step-by-step guide on how to disconnect the MX150 connectors.

B. TPA servicing Blade side

C. TPA servicing Receptacle side

D. 1.50 mm terminal removal

Details the procedure and tools for removing 1.50 mm terminals.

E. Terminal removal (continued)

F. Terminal removal (continued)

G. Service tools

Electrical Continuity Checking

Preferred method of probing

B. Alternative method of probing

Crimping

Hybrid Connector

Troubleshooting

A. MX150 16 Way Male Hybrid

B. MX150 16 Way Male Hybrid

D. MX150 16 Way Male Hybrid

Troubleshooting issue regarding the TPA being removed from the connector.

E. MX150 16 Way Male Hybrid

molex MX150 Specifications

General

Sealed/Unsealed	Sealed
Contact Material	Copper Alloy
Series	MX150
Termination Style	Crimp
Operating Temperature	-40°C to +105°C
Contact Plating	Tin
Mounting Style	Cable
Wire Gauge	12 to 20 AWG
Ingress Protection	IP67
Contact Type	Male and Female