Using the Keypad 2-1
USING THE KEYPAD
This chapter describes how to
♦ connect the keypad
♦ use the keypad
♦ configure the McDonald’s system–IMPORTANT!
♦ set the date and time
♦ process the product
♦ print a Use First label
♦ use the Stop Printing function.
Note: Keep this manual in a safe place; otherwise,
changing the settings requires a service call.
Connecting the Keypad’s Power Supply
The keypad should not be operated in a location that
has room temperatures above 158°F or below –4°F for
extended periods of time. This could permanently
damage the display.
To connect the power supply to the keypad:
1. Place the keypad on a table or shelf.
2. Place the keypad’s power supply in a suitable
location, preferably on a table near an electrical
outlet.
3. Plug the three-hole end of the AC adapter cable
into the three-pronged outlet in the keypad’s
power supply.
4. Plug the power supply cable with the L-shaped
end into the socket on the right side of the
keypad.
2
To Next Page
Loading...
