Using the Keypad 2-5
Setting up the McDonald’s System
IMPORTANT - Please perform the following steps
before using the system.
To set up the system:
1. Press the McDonald’s button three times.
SELECT DATE OR TIME
2. Press the number 3 button.
SENDING I PACKET COMMAND TO PRINTER,
PLEASE WAIT.
3. Press any key to print a label.
Setting the Date and Time
To set the date:
1. Press the McDonald's button three times.
SELECT DATE OR TIME
2. Press the number 1 button. The display shows the
current date setting. If this is correct, press the
McDonald’s button to return to the main display.
To change the setting, use the numeric
buttons:
♦ Press 1 to change the month
♦ Press 2 to change the day
♦ Press 3 to add a year
♦ Press 4 to subtract a year
3. Press the McDonald’s button to save the changes
and to return to the main display.
To Next Page
Loading...
