Troubleshooting 4-3
Problem Action
Label exits partially out
of the printer or skips a
label.
A label may be caught in the
printer. See “Clearing Label
Jams” in Chapter 3 for more
information.
Make sure the labels are
loaded correctly and that they
are the Paxar/Monarch labels
recommended for this
application. See “Loading
Labels” in Chapter 1 for more
information.
Make sure the labels are
loaded correctly and that they
are the Paxar/Monarch labels
recommended for this
application. See “Loading
Labels” in Chapter 1 for more
information.
Make sure the cover is closed
completely.
Clean the printhead. See
"Cleaning the Printhead" in
Chapter 3 for more
information.
Printing is faded or
poor quality.
Adjust the print
speed/darkness. See your
System Administrator.
To Next Page
Loading...
