Need help?Do you have a question about the Monoprice extrusion i3 13860 and is the answer not in the manual?
General| Build Volume | 200 x 200 x 180 mm |
|---|---|
| Print Technology | Fused Deposition Modeling (FDM) |
| Nozzle Diameter | 0.4 mm |
| Layer Resolution | 0.1 - 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Frame Material | Aluminum |
| Print Speed | Up to 100 mm/s |
| Supported Materials | PLA, ABS, PETG, TPU |
| Bed Temperature | Up to 100 °C |
| Nozzle Temperature | Up to 250 °C |
| Display | LCD |
| Frame | Open |
| Weight | 10 kg |
| Dimensions | 400 x 400 x 400 mm |
To Next Page