Need help?Do you have a question about the Monoprice Delta Pro and is the answer not in the manual?
General| Accuracy | 0.05 mm |
|---|---|
| Nozzle width | 0.4 mm |
| Print technology | Fused Filament Fabrication (FFF) |
| Printing material | ABS, Nylon, Polyethylene Terephthalate Glycol (PETG), Polylactic acid (PLA), Wood fiber |
| Maximum travel speed | 150 mm/sec |
| Layer thickness (max) | 0.3 mm |
| Maximum build size (WxDxH) | 270 x 270 x 300 mm |
| Filament thickness supported | 1.75 mm |
| Product color | Black |
| Built-in display | Yes |
| Model file formats supported | gcode |
| Maximum extruder tip temperature | 310 °C |
| Maximum print platform temperature | 100 °C |
| Card reader integrated | - |
| Mac operating systems supported | Mac OS X 10.0 Cheetah, Mac OS X 10.1 Puma, Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 10.2 Jaguar, Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks |
| Windows operating systems supported | Windows 10 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 220 W |
| AC adapter output voltage | 24 V |
| 3D scanner | No |
Weight and Dimensions| Width | 525 mm |
|---|---|
| Height | 940 mm |
| Weight | 12000 g |
Essential safety precautions for operating the 3D printer, including handling hot parts and electrical safety.
Calibrating the Z-offset and print bed for optimal adhesion and first layer quality.
Recommended configuration parameters for slicing software.
Adjusting firmware settings for precise print dimensions.
Tuning the printer's temperature control system for stability.
Guide to updating the printer's software for new features and fixes.
To Next Page
