Need help?Do you have a question about the Monoprice Select Mini 3D Printer V2 and is the answer not in the manual?
General| Build Volume | 120 x 120 x 120 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Frame Material | Metal |
| Heated Bed | Yes |
| Build Plate Temperature | Up to 60°C |
| Nozzle Temperature | Up to 250°C |
| Display | LCD |
| Print Technology | Fused Deposition Modeling (FDM) |
| Supported Materials | PLA, ABS |
| Power Requirements | 100-240V AC, 50/60Hz |
Essential safety precautions and warnings for operating the 3D printer to prevent damage or injury.
Guide on navigating and interacting with the printer's LCD screen menu system.
Detailed steps for installing the Cura slicing software on a Windows computer.
Instructions for installing and configuring Repetier-Host software for the 3D printer.
Information about FCC regulations and compliance for the 3D printer.
Information about Canadian Industry Canada (IC) compliance for the 3D printer.
To Next Page
