Section 3 - System Installation & Handling
3.1 Packaging Contents
The system will arrive on 2-4 pallets, depending on the options purchased. Depending on the
configuration, items below may differ. Additional purchased options may be pre-integrated in the
sample chamber or packaged separately. Refer to the shipment packing list for more details.
Compressor Box
• Helium Compressor
• Helium Hoses (2): SUPPLY & RETURN
• Vacuum Hose
Cryostat Box
• Cryostat and Sample Chamber (single unit) with pre-installed options (depending on
configuration ordered)
System Control Box
• System Control Unit with pre-installed peripheral cards (depending on configuration ordered)
Vacuum Control Box
• Vacuum Control Unit
Accessory Box
• User Interface Touchscreen Display
Cables & Hoses
• Main Power Cords (3): for the Compressor (C19), System Control and Vacuum Control Units (C14)
• 6-socket to 6-pin circular M-F connector cable: Compressor to Cryocooler Head
• DSUB9 F-F serial cable: System Control to Compressor CAN communication
• DSUB25 M-M cable: ACM to Vacuum Control
• DSUB37 F – split to DSUB25 M, DSUB25 F, MDR26: TCM to cryostat control
• USB & HDMI cables: for the User Interface Touchscreen Display
Accessory Kit
• Tweezers
• Pick Tool
• Allen keys (3): M1.5, 2.0 & 4.0
• Apiezon® N-grease: for cryogenic thermal connections only
• Apiezon® L-grease: for lubricating O-rings only
• GE Varnish Adhesive (VGE): for wires or samples within 4 K space
• Kapton® Tape: for wire insulation
To Next Page
Loading...