o Cooler: status of the cryocooler/compressor | Stage 1 and Stage 2 temperature channels
o Sample Chamber: status of all sample chamber temperature channels
5.1.2 Remote Graphical Display
The user interface can alternatively be viewed or controlled via an external PC using Virtual Network
Computing (VNC) technology. When Remote Graphical Display is enabled, the VNC connection will
mirror the UI control screen.
To enable Remote Graphical Display (system control unit must be connected to a local network):
1. On the touchscreen UI, navigate to MENU > REMOTE CONNECTIONS
2. Toggle the Remote Graphical Display switch to ENABLED
3. Follow the onscreen directions for connecting to the IP address using a VNC viewer software
5.1.3 Scripting
The instrument can alternatively be controlled via external scripting commands.
To use external scripting with the instrument (system control unit must be connected to a local
network):
1. On the touchscreen UI, navigate to MENU > REMOTE CONNECTIONS
2. Toggle the Instrument Scripting switch for the desired instrument to ENABLED
3. Follow the onscreen directions for opening the on-board scripting documentation, then use the
available instructions for scripting with the instrument.
To Next Page
Loading...