Montech 65670 User Manual

Assembly instructions BA-100155
Control unit MonTurn
15
4.3 Handling
Figure 1: MontTurn front view
Direction Velocity
The direction of rotation (transport direction) can be
set via the left-hand rotary switch (positive and
negative).
The conveying speed can be continuously adjusted
from 0-100% using the right-hand rotary switch.
The maximum permissible load on the conveyor belt is
independent of the conveying speed.
The effective maximum acceleration via the analog
input is limited by the acceleration and deceleration
value of the drive on the conveyor belt. The
acceleration value can be changed via the operating
and parameterizing unit MonTouch. See assembly
instructions for the operating and parameterizing unit
MonTouch BA-100157.

Montech 65670 Specifications

General

Brand	Montech
Model	65670
Category	Control Unit
Language	English