Assembly instructions BA-100155
Control unit MonTurn
26
7 Disassembly and Disposal
After the device has reached the end of its service life, disassemble the device and dispose of it in an
environmentally compatible manner.
7.1 Improper disassembly
Disassembly:
– Shut system down and secure against accidental restart (lock-out/tag-out)
– Disconnect the power supply
– Clean the components
– Take components apart and sort according to material type
CAUTION!
Improper disassembly can result in injury!
Stored residual energies, sharp-edged components, corners and points on and in the device
or necessary tools may cause injury.
– Prior to starting any work, make sure there is enough space
– Handle open, sharp-edged components with care
– Keep assembly space neat and clean! Components and tools lying around or
carelessly stacked are an accident hazard
– Disassemble components expertly
– Secure components against falling down or tipping over
To Next Page
Loading...