Montech 65670 - Assembly and Disassembly; Fastening instructions

Assembly instructions BA-100155
Control unit MonTurn
19
5.2 Assembly and Disassembly
WARNING!
Do not use oils and greases with molybdenum disulfide or other high-pressure additives, or
antifriction pastes. Use PU-compatible lubricants such as Vaseline or silicone spray.
5.3 Fastening instructions
Figure 5: Fastening instructions side view
The control unit MonTurn can be mounted directly to the chassis of the TB40 conveyor via the fastening
component.
Required tool: Allen key SW4
Lateral profile conveyor TB40