To Next PageTo Next PageWhy are my clothes too dry and hot to touch after using my montpellier MTD30P?
Your clothes may be too dry or hot if the drum is overloaded, preventing clothes from moving freely. Removing clothes before the cool down cycle is complete or using the incorrect program for the fabric can also cause this. The temperature may also be too high.
Why is my montpellier MTD30P appliance hot to the touch?
If your Montpellier Dryer is hot to the touch, it may be because the lint filter is dirty or clogged. Clean the lint filter after every use. Also, the exhaust duct may be dirty, trapped, or kinked; clean out the rear vent/vent hose regularly.
General| Colour | White/Black |
|---|---|
| Features | Delay Start Unbalanced Control System Adjustable Temperature and Spin Settings Child Lock |
| Voltage V/Frequency (Hz) | 220-240 V, 50 Hz |
| Electrical Current (A) | 13 |
| Energy Consumption (kWh/Cycle) (Washing, Spinning and Drying) | 5.67 |
| Energy Consumption (kWh/Cycle) (Washing, Spinning only) | 1.23 |
| Energy Rating | B |
| Water Consumption (l/Cycle) (Washing, Spinning and Drying) | 118 |
| Washing Performance Class | A |
| Spin Speed (rpm) | 1200 |
| Max Load Capacity (Washing) (kg) | 7 |
| Max Load Capacity (Drying) (kg) | 5 |
Weight and Dimensions| Height (cm) | 85 |
|---|---|
| Width (cm) | 60 |
| Depth (cm) | 60 |
