Moog Drummer From Another Mother - Syncing DFAM with Mother-32

31
SYNCING DFAM WITH A MOTHER-32
To Sync your DFAM to a
Mother-32, simply patch from
the ASSIGN output jack on
the Mother-32 Patchbay, into
the ADV / CLOCK input on the
DFAM.
IMPORTANT NOTE: You will
need to ensure that the Mother-
32’s Assignable output is set to
transmit clock. To learn more
about Mother-32’s Assignable
output, see pages 44, 49, and
50 in the Mother-32 User’s
Manual.
Press RUN / STOP on your DFAM. This will ensure that it is ready to play when
it begins receiving a Clock signal from the Mother-32.
Press RUN / STOP on the Mother-32. Both units should now be playing in sync.
TIP: Mother-32 can transmit different clock divisions depending on its internal
settings. Experimenting with these clock divisions allows DFAM to play in sync
with Mother-32, but at a division of the master tempo.
MOTHER-32
DFAM
MOTHER-32
DFAM