2022-09-07 - 39 - 2200700
Depth & Position
The Depth & Position menu allows the designation of the format displayed for the craft’s position,
and the display of the depth and safety contour formats.
Touch Position Format to choose between the
following, then touch OK:
• Degrees and Decimal Degrees
• Degrees, Minutes and Decimal Minutes
• Degrees, Minutes, Seconds and
Decimal Seconds.
Touch Depth Contour and/or Safety Contour to
choose between the following, then touch OK:
• All
• 66 FT
• 33 FT
• 16 FT
• 6 FT
• Off
To Next Page
Loading...
