Morso 1440B - Table of Contents

2 3
DK ENG
1.0 Installation of your Morsø stove Page no.
1.1 Checking loose parts in the stove 4
1.2 The chimney / ue system 5
1.3 Flue connection 6
1.4 Connection to the existing chimney 6
1.5 Positioning the stove 8
2.0 Operation 11
2.1 Before you start ring 11
2.2 Lighting & loading intervals 12
3.0 Maintenance 15
3.1 Exterior maintenance 15
3.2 Internal maintenance 15
3.3 Cleaning the stove & the ue 17
3.4 Leaving the stove for extended periods 18
3.5 Parts diagram 19
3.6 Parts list 20
Enjoy your new Morsø stove!
We congratulate you on your choice of a Morsø
stove. Morsø has been producing some of the
world’s best stoves since 1853. If you follow this in-
stallation- and operating instruction carefully, we
can assure you many years of warmth and pleasure.
Contents
Optional Accessories
A wide range of accessories (such as handling gloves, reside tools, glass cleaner and heat-
proof paint) are available for use with your Morsø stove. They help with day-to-day running
and maintenance. Contact your Morsø dealer for more information.
The Morsø 1440B squirrel meets the U.S. Environmental Protection Agency’s emission lim-
its for wood heaters sold on or after May 15, 2020.
The Morsø 1440B squirrel have been certied by PFS TECO. The test standards are UL-1482-
2011 (R2015)for the United States and ULC-S627-00 for Canada.
The stove is listed for burning wood only. Do not burn other fuels.
Under specic test conditions this heater has been shown to deliver heat at rates ranging
from 12,115 to 24,733 Btu/hr.
This appliance was determined to have an average higher heating eciency value of 73.5%
when tested in accordance with B415.1.”
This wood heater needs periodic inspection and repair for proper operation. It is
against federal regulations to operate this wood heater in a manner inconsistent with
operating instructions in this manual.
Cast iron
Cast iron is a live material. There are no two ovens that are identical. This is partly due to the
tolerances of the casting process, partly because the ovens are a work of craftsmanship.
Minor unevennesses may also occur in the cast iron surface.
Portland,Oregon
USA
Certied &
Listed By
PFS TECO
Report Number: F20-579