Mosa COMAP InteliNano PLUS

Need help?

Do you have a question about the Mosa COMAP InteliNano PLUS and is the answer not in the manual?

Summary

1. OPERATOR INTERFACE

GEN-SET CONTROL BUTTONS

Describes the function of control buttons on the gen-set.

GEN-SET OPERATION INDICATORS

Explains the meaning of the status LEDs and the display.

2. START AND STOP ENGINE

AMF in MANUAL mode

Details starting and stopping the engine in AMF Manual mode.

MRS in MANUAL mode

Details starting and stopping the engine in MRS Manual mode.

AMF in AUTO mode

Explains engine behavior in AMF Auto mode.

MRS in AUTO mode

Explains engine behavior in MRS Auto mode.

3. DISPLAY SCREENS STRUCTURE

AMF main screens structure

Describes the layout of main screens in AMF mode.

MRS main screens structure

Describes the layout of main screens in MRS mode.

4. ALARMS, EVENTS AND HISTORY MANAGEMENT

Events

Details how events are recorded and displayed in the history.

Warnings

Explains the system for warnings and their display.

Shutdowns

Covers shutdown procedures and types of shutdown alarms.

ECU Messages

Information about diagnostic messages from the ECU.

5 SETUP

Accessing the setup mode

Instructions on how to enter the setup configuration.

Setpoints

Details on configurable setpoints for basic settings.

6 TECHNICAL DATA

Engine parameters and protections

Technical specifications for engine parameters and protections.

Generator protections

Technical specifications for generator protections.

AMF (Auto Mains Failure) setting

Settings related to the Auto Mains Failure function.

Outputs and inputs

Details of the controller's output and input terminals.

User curves

Describes different user curves for measurements and parameters.

General Technical Specifications

Covers power supply, operating conditions, and general specs.