Need help?Do you have a question about the MotionBlinds eve CM-03-E and is the answer not in the manual?
Use a damp, soft, lint-free cloth for cleaning the device and its components.
Do not attempt repairs; risk of electric shock and voiding warranty. No user-serviceable parts.
Follow manual advice; contact local dealer for damaged or malfunctioning products.
Do not dispose with household waste; recycle responsibly to promote material resource reuse.
Identifies key components like USB-C port, LED indicator, and control buttons on the motor.
Follow the provided steps to correctly install the blind mechanism.
Connect the blind to a standard USB-C 5V power supply to activate it.
Integrate with your chosen smart home platform, ensuring a compatible Thread Border Router.
Scan the Matter Setup Code to add the blind; program end positions via app or button.
Pull chain to the desired bottom point, adjust, and save the position using the button.
Hold the button when the blind is at the bottom until it confirms the saved position.
Pull chain to the desired top point, adjust, and save the position using the button.
Hold the button when the blind is at the top until it confirms the saved position.
Place blind at the desired end position and pull/wait for it to reach that point.
Hold the program button for 3s to remove a bottom/top position; confirmation via blind movement.
Pull chain to the new bottom point, adjust, and save the position using the button.
Hold button at new bottom position until blind confirms saved position.
Position blind at favorite spot, hold pull for ~7s to save it.
Hold pull for 5s to move the blind to its previously saved favorite position.
Remove old favorite (Step 10), then set a new one by following Step 9.
Double-press End Position button within 1s if app direction is opposite to blind's movement.
Connect via USB-C to a 5V power supply; recommended to charge at least annually.
Scan the QR code for the full user manual and advanced operational details.
Essential safety directives to prevent injury or death. Keep these instructions for reference.
Follow installation steps precisely to avoid severe injury caused by incorrect setup.
Product contains no user-serviceable parts; use approved antennas; modifications invalidate certifications.
Complies with FCC Part 15; must not cause harmful interference and must accept any received interference.
Tested as Class B digital device, providing protection against harmful RF interference.
Declares compliance with EU directive 2014/53/EU; full text available online.
Contains licence-exempt RSS; must not cause or accept interference.
Hold program button for 10s to clear app connection; LED confirmation provided.
Hold reset/program button for 20s to delete end positions and all connections; confirmation provided.
Hold program button for 5s to adjust speed (1 of 5 levels); be careful not to reset connection.
General| Product Name | MotionBlinds eve CM-03-E |
|---|---|
| Category | Window Blinds |
| Connectivity | Bluetooth |
| Power Source | Solar Panel |
| Compatibility | Google Assistant |
| Material | Fabric |
| Control Method | Remote Control |
To Next Page