EN
25
2.5 - Control Unit models and technical characteristics
TECHNICAL SPECIFICATIONS CE24CNC
Power supply (L-N) 230 Vac (+10% - 15%) 50-60 Hz
Max motor load 150 W
Output for Vac accessories power
Device test power Vdc
24 Vac without regulation 200 mA
24 Vdc without regulation 250 mA
Courtesy light output 24 Vdc 25 W
Flashing light output 24 Vdc 25 W
Pause time Adjustable 0-900 sec.
Operating temperature -20 °C + 55 °C
230 Vac power supply line fuses 1.6 A slow-acting
Max. number of transmitters storage FIX
CODE
150 transmitters
Max. number of transmitters storage ROL-
LING CODE
150 transmitters
• Power supply with protection against short-circuits inside the
control unit, on motors and on the connected accessories.
• Obstacle detection.
• Automatic learning of working times.
• Safety device deactivation by means of dip switches: there
is no need to bridge the terminals of safety devices which are
not installed - the function is simply disabled by means of a dip
switch.
Code Description
CE24CNC 24V control unit for sliding gates, up-and-over doors or electromechanical barrier
1
4
16
8
5
7
9
6
17
2
3
10
11
13
12
15
14
To Next Page
Loading...
