Appendix A:
Australian Wiring Instructions
The following instructions describe how to assemble the enclosed power connector to the power
cable’s flying leads.
Part I – Power Connector Parts
1. The (out-of-the-box) Australian power connector plug along with its power assignment is shown in the
graphics below.
Figure 9-23 Front View of the Australian Power Connector Plug
Figure 9-24 Side View of the Australian Power Connector Plug
Front View
GROUND
LINE NEUTRAL
Side View - showing an access
GROUND
NEUTRAL
LINE
Access Screw
2. Loosen the Access Screw on the plug until its contents are accessible, as shown in the graphics
below.
9-20
To Next Page
Loading...
