Motorola 2.1 - Device Assembly; Figure 4-2 Required Tools; Figure 4-3 Attaching the Mounting Bracket; Procedure 4-1 Device Assembly

Chapter 4: Site Selection and Deployment Guidelines
• Phillips head screwdriver
• Level
• Weatherproofing tape
• Electrical tape
Figure 4-2 Required Tools
Opening the MOTOMESH Duo device will void the warranty.
Device Assembly
Procedure 4-1 Device assembly
Using the 7/16” wrench position the mounting bracket. There are four possible positions. Figure 4-3
shows the recommended bracket position for mounting the device such that both antennas are facing
upward. This is the recommended configuration.
Figure 4-3 Attaching the mounting bracket
4-3