Motorola 2.1 - Mounting Bracket; Figure 3-3 Pivot Bracket

Chapter 3: MOTOMESH Duo Hardware
Mounting Bracket
The MOTOMESH Duo device includes a flexible pivot mounting bracket. This bracket can be moved to
four different locations on the Duo device to accommodate different mounting scenarios. A 7/16” wrench
is required to disassemble and tighten the mounting bracket nuts and bolts. It is also used to adjust the
pivot function of the bracket. Also note that one of the bracket screw holes contains a ground lug.
Figure 3-3 Pivot Bracket
Ground Lu
g
Pivot Bracke
t
3-4