Motorola 3.5

If the radio fails to get a location fix, the display
shows No service and returns to the previous
display.
5
To return to the Home screen, press , the PTT
button, the preprogrammed GPS button or the Menu
Select button directly below Exit
.
Saving a Waypoint
Ensure that your radio shows the current location on the
screen.
1
Press the Menu Select button directly below Optn.
2 Perform one of the following actions:
•
or to Save as Waypt and press the Menu
Select button directly below Sel.
• or to Save as Home and press the Menu
Select button directly below Sel and proceed to
step 5.
• or to Save as Dest. and press the Menu
Select button directly below Sel and proceed to
step 5.
A blinking cursor appears on the screen.
3 Use the keypad to edit the auto-generated waypoint,
if required, or press the Menu Select button directly
below Cncl to return to the Location main screen.
4
Press the Menu Select button directly below Ok
once you are done.
One of the following scenarios occur:
• The display shows Current loc saved as
<Waypoint name>
.
• The display shows Current loc saved as
[Home].
• The display shows Current loc saved as
[Destination].
5
To return to the Home screen, press , the PTT
button, the preprogrammed GPS button or the Menu
Select button directly below Exit
.
English
150