Motorola 3.5

6
Press the Menu Select button directly below Yes or
No to proceed delete the device or to exit this
function and return to previous screen.
If the device is deleted successfully, the display shows
<Device Friendly Name> cleared to indicate clearing is
successful.
If the device is not deleted successfully, you hear the radio
sounds a short, low-pitched tone. The display shows
<Device Friendly Name> clear failed. The display
returns to previous screen.
NOTICE:
If Re-Pair Timer is set to infinite and you clear keys
on the radio, you must clear keys on all previously
paired devices as well. (Please see your
Accessories manual for further details.)
Clearing All Bluetooth Devices
Information
Do one of the following to clear all Bluetooth devices
information. You can use the options interchangeably
depending on your preference and the programmed
functions.
•
Clearing all Bluetooth devices information using the
preprogrammed Bluetooth On/Off button:
a.
Long press the preprogrammed Bluetooth
On/Off button.
You hear a short, medium-pitched tone. The
display shows Please wait to indicate clearing
is in progress.
If successful, the display shows All BT devices
cleared.
If unsuccessful, the radio sounds a short, low-
pitched tone. The display shows Clear all BT
devices failed. The display returns to
Bluetooth feature screen.
• Clearing all Bluetooth devices information using the
radio menu Clr:
a.
or to Devices and press the Menu Select
button directly below Clr.
You hear a short, medium-pitched tone. The
display shows Clear all BT devices?.
English
174