D-4
Troubleshooting CPU Boards
D
V. The debugger is
in system mode
and the board
autoboots, or
the board has
passed
selftests.
A. No apparent
problems —
troubleshooting
is done.
No further troubleshooting steps are required.
VI. The board has
failed one or
more of the
tests listed
above, and
cannot be
corrected using
the steps given.
A. There may be
some fault in
the board
hardware or the
on-board
debugging and
diagnostic
firmware.
1. Document the problem and return the board for service.
2. Phone 1-800-222-5640.
TROUBLESHOOTING PROCEDURE COMPLETE.
Table D-1. Troubleshooting MVME162LX Boards (Continued)
Condition Possible Problem Try This:
To Next Page
Loading...
