Setting the Time and Date
➊ From the Function menu, press H to 
move the cursor to 
v.
➋ Press K.
➌ Press  I to move the cursor to the hour 
digit.
➍ Press  F or G to adjust the hour.
➎ Repeat steps 3 and 4 to adjust the 
minutes, AM/PM/24 hr., month, day, 
and year.
➏ Press K to activate the setting.
Setting Alarms
➊ From the Function menu, press H to 
move the cursor to 
v.
➋ Press K.
➌ Press G.
➍ Press I to move the cursor to the 
alarm symbol.
➎ Press  F or G until c is displayed.
➏ Follow steps 3 through 6 in 
Time
 
and 
Date
 to set the alarm time.
To disable the alarm, in step 5 above, 
press 
F or G until eis displayed.
To set a message alarm:
➊ With the message displayed, press K.
➋ Press I to move the cursor to d.
➌ Press  F or G until c is displayed.
➍ Follow steps 3 through 6 in
Setting
 
the 
Time and Date
.
Note: 
 To set a daily pager or message 
alarm, press 
G until double dashes are 
displayed for the month, day, and year 
(--/--/--).
1029B40Book  Page 2  Tuesday, September 2, 1997  10:49 AM