Motorola AP-5131 - Default Login Change Admin Password; Disconnection Warning Message; Disconnected from AP-5131

Motorola AP-5131 Access Point Quick Setup Guide
Figure 2. Default Login Change Admin Password
8. Change the password to “ishida”, all lower case. Re-type to verify.
9. Select “Apply”.
10. When the WEB UI Disconnection Warning appears, select “OK”. See figures 3, 4.
Figure 3. Disconnection Warning Message
Figure 4. Disconnected from AP-5131
11. If disconnect occurs, at the AP login screen enter the user name and password.
See figure1.
Username: admin
Password: ishida (Note: if not “ishida”, enter the appropriate password)
12. Click Login.
13. Configuration cannot proceed until a country has been selected. At the warning
message, click “OK”. See figure 5.
Rev 1, February 2009 (3) Motorola_AP5131_Quick_Setup