Motorola AP-5131 - Enter LAN #1 Settings

Motorola AP-5131 Access Point Quick Setup Guide
20. Enter the Default Gateway address. This is the IP Address of the store’s router. It
must be in the same range as the Access Point and scales.
Example: 192.168.10.1
21. Set the Primary DNS Server as zeros.
Figure 7. Enter LAN #1 settings
22. Click “Apply”.
23. When the WEB UI Disconnection Warning appears, select “OK”. See figure 8.
Figure 8. Disconnection Warning Message
24. Internet Explorer has logged out of the AP-5131 configuration application.
25. Close Internet Explorer.
Rev 1, February 2009 (5) Motorola_AP5131_Quick_Setup