Motorola APX 2000 User Manual

The display shows Change Password screen.
3
or to Unlock Pswd.
4
Press the Menu Select button directly below Sel.
5 Enter the old password.
6
Press the Menu Select button directly below Ok.
7 Enter the new password.
8
Press the Menu Select button directly below Sel.
9 Re-enter the new password.
10
Press the Menu Select button directly below Sel.
The password is updated.
If the two passwords do not match, repeat Steps 5
through 10.
Note: If you enter three incorrect old passwords, the
radio exits the password feature. You cannot access
this feature again until you turn the radio off and on.
Changing Your Tactical Inhibit Password
1
or to Pswd.
2 Press the Menu Select button directly below
Pswd.
The display shows Change Password screen.
3
or to Tactical Inh Encode Pswd.
4
Press the Menu Select button directly below Sel.
5 Enter the old password.
6
Press the Menu Select button directly below Ok.
7 Enter the new password.
8
Press the Menu Select button directly below Sel.
9 Re-enter the new password.
10
Press the Menu Select button directly below Sel.
The password is updated.
If the two passwords do not match, repeat Steps 5
through 10.
Advanced Features
127
English

Motorola APX 2000 Specifications

General

IP Rating	IP67
Operating Temperature	-30°C to +60°C
GPS	Optional
Bluetooth	No
Frequency Range	700/800 MHz
Power Output	1-5 W (VHF), 1-3 W (700/800 MHz)
Channels	Up to 1, 000
Battery Life	Up to 10 hours (digital)
Digital Protocol	APCO P25
Frequency	VHF: 136-174 MHz, UHF: 380-470 MHz, 700/800 MHz: 764-870 MHz
Power	1-3W (700/800 MHz), 1-5W (VHF)