Upgrading Your Radio
FLASHport User’s Guide
12
9. From the menu bar in the CPS main window, select
Tools → FLASHport → Upgrade Radio
10. The Upgrade Radio screen will appear. Using the Browse
button at the end of the edit control, navigate to the location of
the new radio software file (copied to your PC in Step 1), verify
that the directory paths in the Current Settings area are correct
(typically valid unless you have moved files, in which case
you’ll have to select the proper paths), then click OK.
Note: Regarding the UCM Upgrade Path & Filename field, the
UCM (Universal Crypto Module) is used for radios equipped
with Secure Encryption. This field is only used if the radio
contains a UCM module and the module software will be
upgraded.
94C35_Book.book Page 12 Thursday, June 2, 2005 3:10 PM
To Next Page
Loading...
Need help?
General