Display Status Symbols Menu Entries (Use With Menu Navigation)
HL
Power Level.
Power Level. H = high
power; L = low power
Call Received. Receiving an individual
call
View/Program Mode. The radio is in the
view or program mode; On Steady = view
mode; Flashing = program mode
s
Received Signal Strength Indication
(RSSI).
Received signal strength for the
current site (trunking only). The more
stripes in the symbol, the stronger the
signal.
b
Battery
• Conventional = Flashes when the
battery is low.
• Smart = The number of bars (0-3)
shown indicates the charge remaining
in your battery.
r Talkaround. You are talking directly to
another radio or through a repeater;
On = direct;
Off = repeater
C
Monitor (Carrier Squelch). This channel
is being monitored.
T
Scan. The radio is scanning a scan list
e The radio is in Emergency state
m
p
p
Entry Menu Selection Page
%$77
Smart Battery 26
&$//
Private Call 69
5$',2
/2&.
Radio Lock 43
087(
Keypad Mute 45
&+$1
Select a Channel 34
',5
Repeater/Direct 77
3$*(
Call Alert Page 71
3+21
Phone 65
Menu Navigation
U to find Menu Entry
D, or E, or F directly below
Menu Entry to select
h to exit
V or U to scroll through sub-list
D, or E, or F directly below
Menu Entry to select
Entry Menu Selection Page
3:5
TX Power Level 41
6&$1
Scan On/Off 62
6,7(
Site Lock 81
676
Status Call 75
9,(:
Viewing a List 54
=21(
Select a Zone 33
To Next Page
Loading...
