76
Common Radio Features
Note: No traffic is heard on trunked channels while Status Calls is
selected.
If the radio detects no Status Call activity for six seconds, an
alert tone sounds until the
h or PTT button is pressed.
Send a Status Call
Use the Preprogrammed Status Button
1 Press the preprogrammed
Status Button.
The last acknowledged
status call or the first status
in the list is displayed.
2 Press U or V to scroll
through the status list.
OR
Use the keypad to enter a
number corresponding to the
location in the status list.
3 Press the PTT button to send
the status.
When the dispatcher
acknowledges, four beeps
sound and $&.5(&(,9(' is
displayed.
If no acknowledgment is
received, you will see 12
$&.12:/'*.
4 Press h to go to the home
display.
$&.5(&(,9('
12$&.12:/'*
To Next Page
Loading...
