Motorola CLPe Series

Figure 3: Connecting Wired Audio Accessory
3 Turn the radio on.
4 Press either the Battery Status, Menu, or Volume Control button to check for audio through
the audio accessory.
Table 1: Top LED Configuration if Wired Audio Accessory is not Connected or Removed
User Mode LED Status Color
Turn on radio without an au-
dio accessory plugged in.
Solid Blue
Audio accessory removed
while radio is on.
Red/purple blinks until an
audio accessory is plugged
in
NOTICE:
Lower the radio volume before placing the audio accessory in or near your ear.
The CLPe Series radios offer various audio accessories. For detailed audio accessories
list, refer to http://www.motorolasolutions.com/CLPe for information on approved
accessories.
MN006181A01-AA
Getting Started
14