Motorola CM140 Basic User's Guide

8
English
BASIC USER GUIDE
RadioOnIndication(CM140)
At power up the radio performs a self test routine.
During the routine the Green LED lights. On
completion of a successful self test the radio
produces the Self-Test pass Tone, the Green LED
indicator goes out and the display shows the
Channel that was in use at power down, typically:
If the radio fails the power up routine the power up
fail tone sounds and the error number is displayed.
Note: If your radio fails the self test routine, record
the error number and consult your dealer.
Selecting a Radio Channel
Your radio offers up to 64 channels (CM160), or 8
channels (CM140), however some may not be
programmed. Check with your dealer for more
information.
Press
G to increment the Channel number
or
H to decrement it.
Using Home Revert Memory Channels (1&2)
Two of the programmable buttons may be pre-
programmed by your dealer as Memory Channel
buttons, allowing you quick access to frequently
used channels. A press of the button will take you to
the assigned channel.
Using the Microphone Keypad (If programmed)
Enter the desired channel number on the keypad.
Press # on the keypad to select the channel.
5
CM140_160_EN.fm Page 8 Monday, November 24, 2003 3:49 PM

Motorola CM140 Specifications

General

Brand	Motorola
Model	CM140
Category	Radio
Language	English