Motorola CM140 Basic User's Guide

9
English
BASIC USER GUIDE
Receiving a Call
Note: The system may have a limited call time and
the call may be terminated automatically if
this call time is exceeded.
Sending a Call
If your system uses the request-to-talk feature, use
the following method to send a call:
Your radio may be configured for ‘Transmit Inhibit’
under certain conditions (e.g. when the channel is in
use by others) in which case, the channel busy tone
will sound when you press the PTT or call button to
indicate that transmission is inhibited.
1 Turn your radio on.
2 Adjust the radio’s volume.
3 Select the desired channel.
4 To respond, hold the microphone vertically 2.5
to 5 cm (1 to 2 inches) from your mouth. Press
the PTT to talk; release it to listen
1 Turn your radio on.
2 Select the desired channel.
3 Hold the microphone vertically 2.5 to 5 cm
(1 to 2 inches) from your mouth. Press the
PTT to talk; release it to listen.
1 Turn your radio on.
2 Select the desired channel.
3 Press the PTT (for priority requests to talk, the
PRTT button) and wait for the talk permit tone.
4 Hold the microphone vertically 2.5 to 5 cm
(1 to 2 inches) from your mouth. Press the
PTT to talk; release it to listen.
CM140_160_EN.fm Page 9 Monday, November 24, 2003 3:49 PM

Motorola CM140 Specifications

General

Brand	Motorola
Model	CM140
Category	Radio
Language	English