Motorola CT150 - Sending a Call; Receiving a Call

22
English
GETTING STARTED
SENDING A CALL RECEIVING A CALL
1 Turn your radio on.
2 Use the Channel Selector knob to select the
desired channel.
3 Hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.
4 Release the PTT to listen.
1 Turn your radio on.
2 Adjust the radio’s volume (see page 21).
3 Switch to the desired channel. To respond,
hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.