Motorola D8713 - Incoming Call Control; Add Numbers to the Blacklist; Add Area Codes to the Blacklist; Remove All Blocked Numbers from the Blacklist

34
Call control
7.2 Incoming call control
7.2.1 Add numbers to the blacklist
When phone numbers are added to the blacklist, calls from those phone
number will not ring on your phone. Up to 1000 numbers can be added to an
invisible blacklist.
1. Press B in standby. Enter the access PIN (default = 0000).
2. Press the left C key, Call Blocking is displayed.
3. Press the left C key, scroll E to select Block numbers .
4. Press the left C key, Add numbers is displayed.
5. Press the left C key, enter the number.
6. Press the left C key to confirm.
7.2.2 Add area codes to the blacklist
When area codes are added to the blacklist, all incoming calls from those areas
will be blocked.
1. Press B in standby. Enter the access PIN (default = 0000).
2. Press the left C key, Call Blocking is displayed.
3. Press the left C key, scroll E to select Block numbers .
4. Press the left C key, scroll E to select Area codes .
5. Press the left C key, enter the area code.
6. Press the left C key to save.
7. To add another area code, press the left C key.
8. Add area code is displayed.
9. Press the left C key, enter the area code.
10. Press the left C key to save. Repeat steps 7 - 10 above.
7.2.3 Remove all blocked numbers from the blacklist
1. Press B in standby. Enter the access PIN (default = 0000).
2. Press the left C key, Call Blocking is displayed.
3. Press the left C key, scroll E to select Block numbers .
4. Press the left C key, scroll E to select Delete all .
5. Press the left C key twice to confirm.