40
Settings
9.5 Call settings
You can enable or disable the following call features.
Auto answer
Lift the cordless handset from the base or charger cradle and you will be
connected to the incoming call automatically. You can switch this feature on
or o.
Auto end call
Place the cordless handset to the charger to end the call. You can switch this
feature on or o.
Auto join call
During a call on handset 1, press L on handset 2 to select to join the call with
handset 1.
First ring
When it is switched on, the phone starts ringing immediately before the ID
is displayed when receiving a call on the landline. When it is switched o,
the caller ID is displayed before the phone starts ringing. For this feature to
work, you must first subscribe to the service from your network provider. A
subscription fee may be payable.
1. Press the left C key in standby, scroll U to
Settings.
2. Press the left C key, scroll E to select
Call settings
.
3. Press the left C key, scroll the left and right navigation keys to set the auto
answer
On
or
O
.
4. Press E, scroll the left and right navigation keys to set the auto end call
On
or
O
.
5. Press E, scroll the left and right navigation keys to set the auto join calls
On
or
O
.
6. Press E, scroll the left and right navigation keys to set the first ring
On
or
O
.
7. Press the left C key to confirm or right C key to return to the previous
menu.
9.6 Base settings
9.6.1 Ring tone and volume
You can set dierent ringer melodies and adjust the base ringer volume levels
for your external calls. Choose from 5 dierent ringer melodies and 5 volume
levels and Ringer O. You will hear a sample ring and volume level as you
scroll to each option.
1. Press the left C key, scroll U to
Settings.
2. Press the left C key, scroll E to select
Base settings
.
3. Press the left C key, scroll E to select
Ringing
.
4. Press the left C key, scroll the left and right navigation keys to select a
melody (1 - 5).
To Next Page
Loading...
Need help?
General
