1 INTRODUCTION
3
Rear Panel
1 Cable In — Connects to cable signal from your service provider
2 RF Out — Ch 3/4 modulated audio/video (SDTV) to DVD players or VCRs
3 M-Card — Inserted M-Card
4 Serial — Service only
5 S-Video — Connects to S-Video (SDTV) input of TV or VCR
6 Digital Audio (S/PDIF) — Provides Dolby
®
Digital 5.x audio or PCM output
7 YPbPr — Component video output (HDTV)
8 Video/Audio — Composite Video (SDTV) /Audio inputs and outputs
9 HDMI — High-Definition TV (HDTV) connector
10 eSATA* — External Serial ATA disk interface
11 Ethernet* — Network connection
12 USB* 2.0 — High-Speed peripheral device connection
13 IEEE-1394 — Audio and video device connection
14 Power cord connector
* Availability of certain features is dependent upon application support.
To Next Page
Loading...
