Motorola DSR-6402 - PID Mapping

DSR-6400 Series 15
PID Mapping
The DSR-6400 Series uses a PID mapping scheme for the output services for ASI and GIGE output
ports. The following two tables show each of the individual service components and their assigned PID
values on each MPEG program. These PID values affect the output ports: ASI OUT 1, ASI OUT 2, and
GIGE, as shown below. For multiple instances of the same component type, the unit increments the PID
value by one.
ETHERNET
10 / 100
ASI IN ASI OUT 1
VIDEO OUT
OSD VIDEO OUT
ASI OUT 2
GIGE
PID Assignments: ASI OUT 1 Port
MPEG
Program
Processor
Path
Number
Format
PMT Video Audio1 Audio2 DPI DSMCC Subtitle
11
Decimal 256 272 288 289 304 320 336
Hex 100 110 120 121 130 140 150
22
Decimal 512 528 544 545 560 576 592
Hex 200 210 220 221 230 240 250
33
Decimal 768 784 800 801 816 832 848
Hex 300 310 320 321 330 340 350
44
Decimal 1024 1040 1056 1057 1072 1088 1104
Hex 400 410 420 421 430 440 450
PID Assignments: ASI OUT 2 Port
Program/
Resolution
Transcoded
From
Number
Format
PMT Video Audio1 Audio2 DPI DSMCC Subtitle
1 (SD)
ASI1
Program 1
Decimal 256 272 288 289 304 320 336
Hex 100 110 120 121 130 140 150
2 (HD)
Decimal 512 528 544 545 560 576 592
Hex 200 210 220 221 230 240 250
3 (SD)
ASI1
Program 2
Decimal 768 784 800 801 816 832 848
Hex 300 310 320 321 330 340 350
4 (HD)
Decimal 1024 1040 1056 1057 1072 1088 1104
Hex 400 410 420 421 430 440 450
5 (SD)
ASI1
Program 3
Decimal 1280 1296 1312 1313 1328 1344 1360
Hex 500 510 520 521 530 540 550
6 (HD)
Decimal 1536 1552 1568 1569 1584 1600 1616
Hex 600 610 620 621 630 640 650
7 (SD)
ASI1
Program 4
Decimal 1792 1808 1824 1825 1840 1856 1872
Hex 700 710 720 721 730 740 750
8 (HD)
Decimal 2048 2064 2080 2081 2096 2112 2128
Hex 800 810 820 821 830 840 850
Note: The GIGE port
carries the same PID
mapping information as
the two ASI OUT ports.