3
40
Audio1 and Audio2 Gain Menus
These menus allow adjustment of the audio signal output level from +00 to -20 dB, in 1 dB
increments. Press the
buttons until the desired menu appears (either AUDIO1 GAIN or
AUDIO2 GAIN).
The user may adjust the output levels of the left and right channels jointly. The output level of the
right channel tracks the setting for the left channel when the output levels are adjusted jointly.
Mode Field Default: Joint
Note: The Mode field is not editable.
This field is associated with the Audio Gain port and is always set to Joint. This means, both
channels are configured jointly using the Left field settings as the control for both audio channels.
Left and Right Fields Default: +00
Note: The Right field is not editable.
The Left field allows adjustment of the output level of the Left and Right audio signals. Press the
4
button until the cursor is at the Left label, and press ENTER to move into the field. Use the
buttons to simultaneously adjust the output level for the Left and Right audio signals from
+00 to -20 dB, in 1 dB increments.
Press ENTER to confirm the selections.
E Joint +00 +00
AUDIO1 GAIN Mode Left Right
E Joint +00 +00
AUDIO2 GAIN Mode Left Right
To Next Page
Loading...
