Motorola EP450

43
English
PHONE
L or M to
select a number from
the phone list.
– or –
a. Press and release the preprogrammed
Speed Dial button.
b. Press the key (0 to 9) corresponding to
the number you want to call.
Note: To redial the last number dialed (if
not using Speed Dial), press and
release the PTT button immediately
after the access code is sent. The
radio sends the last number dialed.
– or –
If you entered your access code
using the DTMF keypad, press
L
once to access the last number
dialed; then press and release the
PTT button.
7 Press and release the PTT button, if required
for your radio.
XXXXXXXX
8 When your party answers, press and hold the
PTT button to talk. Hold the radio in a vertical
position with the microphone 1 to 2 inches
(2.5 to 5 cm) away from your mouth. Release
the PTT button when the other party wants to
talk, both parties will need to speak in turn.
9 Disconnect the phone call when the conversa-
tion is completed (see page 42).