Motorola EP450

42
English
PHONE
DISCONNECT A PHONE CALL
MAKE A PHONE CALL D
Note: Only the first 8 digits of the phone num-
ber will be displayed on your radio's
display.
Press the preprogrammed Phone button (see
page 19), and skip to step 6.
– or –
6 Press and hold the PTT button to talk. Hold
the radio in a vertical position with the micro-
phone 1 to 2 inches (2.5 to 5 cm) away from
your mouth. Release the PTT button when the
other party wants to talk, both parties will
need to speak in turn.
7 Disconnect the phone call when the conversa-
tion is completed.
1 To disconnect a phone call, do one of the
following:
If your radio has Immediate Auto or Delayed
Auto programmed, go to step 2.
– or –
Enter the deaccess code using the DTMF
keypad and press the PTT button.
2 To exit Phone Mode:
Press the preprogrammed Phone button (
see
page 22
).
– or –
Press and hold K to disconnect the call.
Note: D disappears from the display.
1 Select a channel that has been programmed
for telephone.
2
J to enter menu mode.
3 L or M until
4 J to select
5 Enter your repeater access code, if necessary
(see page 41).
6 When you hear a dial tone:
Enter the phone
number using the
microphone keypad.
– or –
PHONE
PHONE
XXXXXXX