Motorola ex560 xls - Emergency Siren and Home Channel Revert

24
English
GETTING STARTED
SELECTING A CONVENTIONAL
ZONE AND CHANNEL
Up to 160 conventional channels, in one or
more conventional zones, can be programmed
into your radio.
To select a conventional zone and channel
Note: The selection of zones can be programmed
by your dealer either on the Zone/Channel
Selector knob or via the menu keys.
–or–
SENDING A CONVENTIONAL CALL
Note: In the United States, FCC regulations
require you to monitor the conventional
channels before sending a call. The
monitor feature (see page 13) can be
accessed through one of your
programmable buttons.
To send a conventional call
5
With the PTT button depressed, speak clearly
into the microphone.
6 Release the PTT button to listen.
1 Use the Zone/Channel Selector knob to
select the appropriate conventional zone.
2 + or ? until you see the desired
conventional channel on the display.
1 ) to enter menu mode.
2 + or ? until
Zone
3
) to select
4
+ or ? until you see the desired zone
on the display.
5
) to select the desired zone.
6 + or ? until you see the desired
conventional channel on the display.
1 Turn your radio on.
2 Select the desired channel (see “Selecting a
Conventional Zone and Channel”).
Zone
EX560XLS.book Page 24 Thursday, September 27, 2007 3:28 PM