53
English
UTILITIES
SETTING TIGHT OR NORMAL SQUELCH
(CONVENTIONAL OPERATION ONLY)
Use this feature to filter out nuisance
(unwanted) calls and/or background noise.
However, tightening squelch could cause calls
from remote locations to be filtered out as well.
In this case, normal squelch may be more
desired.
To select tight or normal squelch:
Press the preprogrammed Squelch button
(see page 12) to toggle between tight and
normal squelch,
–or–
Do the following:
SETTING THE POWER LEVEL B
Each channel in your radio has a predefined
transmit power level that can be changed.
• High power (S) allows you to reach a radio
that is farther away.
• Low power (R) conserves the battery’s
charge.
• Auto power (conventional operation only)
automatically sets the optimal power level
based on the strength of the signal
received. If the received signal is weak, the
transmit level will be set to high, and vice
versa.
) to enter menu mode.
+ or ? until
) to select
+ or ? until
Utilities
Utilities
Squelch
) to select
+ or ? u n t i l
–or–
until
) to confirm the selection.
Squelch
Sqlch Tight?
Sqlch Normal?
EX560XLS.book Page 53 Thursday, September 27, 2007 3:28 PM
To Next Page
Loading...
