41
English
PHONE
PHONE
Your radio allows you to place and receive
telephone calls through trunked and
conventional systems (depending on phone line
availability). Telephone calls through a repeater
allow only one person to speak at a time.
MAKING A PHONE CALL D
THROUGH AN LTR TRUNKED
SYSTEM
You can make a phone call through a trunked
repeater by using the preprogrammed Phone
button (see page 12). or the menu. D will
appear on the LCD screen when you are in
Phone Mode.
Note: The following instructions assume your
radio has been programmed as follows by
your dealer using CPS (Customer
Programming Software).
• Dial type: Live
• Access/Deaccess type: Immediate Auto
• Tone Span: Timed - 100 ms tone duration
To initiate a phone call:
Do the following:
1 Select a trunked zone and talkgroup that have
been programmed for telephone.
2 ) to enter menu mode.
–or–
Press the preprogrammed Phone button, and
skip to step 5.
–or–
Press and release the Speed Dial button to
use the speed dial feature. Then press the (1
to 9) key corresponding to the number you
want to call on the Phone list. Or press 0 if
you want to call the last number dialed. Press
the PTT button. A dial tone sounds. Press the
PTT button again to send the phone number.
–or–
For LTR system, press and hold the PTT
button while dialing a number. (If your radio
has been programmed for Hot keypad, this is
a radio-wide setting).
3 + or ? until
Phone
EX560XLS.book Page 41 Thursday, September 27, 2007 3:28 PM
To Next Page
Loading...
