42
English
PHONE
4 ) to confirm
D appears on the LCD when you are in
Phone mode.
5 Press and Release the PTT button.
• If phone access is successful, a dial tone
sounds.
• If phone access is unsuccessful, a low-
pitched alternating tone sounds.
Disconnect the call (see step 8) and try
again.
6 Enter the phone number with the keypad. The
number is automatically sent without pressing
the PTT button again.
–or–
Phone
+ or ? to
select a number from
the phone list.
Press and release the PTT button again to
send the number.
7 Hold the radio in a vertical position with the
microphone 1 to 2 inches (2.5 to 5 cm) away
from your mouth. Press the PTT button to talk;
release it to listen.
8 To disconnect the phone call:
Press and hold ( to exit Phone.
D no longer appears on the LCD.
XXX-XXX-XXXX
EX560XLS.book Page 42 Thursday, September 27, 2007 3:28 PM
To Next Page
Loading...
