Motorola GP-68

Getting Started
12
If not using the Charger Base:
➌
Lift the dust cover covering the Accessory Connec-
tor (16).
➍ Insert one end of the Wall Charger into the lower
port of the Accessory Connector (16), and the
other into an electrical outlet.
If using the Charger Base:
➌
Insert the radio / battery into the charging docket.
➍ Refer to Table 1 and 2 on pages 10 and 11 for an
estimation of the duration involved for charging the
battery pack.
➎ Unplug the Wall Charger from the radio when
charging is complete.
NOTE
The LED on the Wall Charger is lit (red) continu-
ously during charging.
Charging with Desktop Charger
NOTE
With Desktop Chargers, the battery can be charged
when connected or not connected to the radio.
➊
Place the Charger Insert into the Desktop Charger.